Electric Drinking Water Pump Company introduces how to use water dispensers:
1. Check the top cover of the water dispenser. If there is no smart seat, it means that the water inlet system does not have the ability to prevent secondary pollution. This type of water dispenser is not suitable for purchase. The smart seat should be installed firmly and the disassembly should be smooth. The thread connection of the guide post and the smart seat must be firm; if it is loose, it cannot be tightened, indicating that the thread of the guide post and the smart seat is not well integrated, and the root of the guide post is easy to fall out or break when used in the future. After bottled water is injected into the water tank (generally 2-3 times), do not press the faucet, the faucet should not drip (the faucet is sealed normally); observe the water level of the bucket, if the water level drops sharply, it means that there is water leakage in the machine (the rubber nozzle head comes out) If there is water leakage), it is not suitable to buy; press the faucet and press your hand (1.5-2 seconds for cooling and 2-2.5 seconds for heating), the faucet should have water flowing out and the water is smooth, indicating that the drinking fountain is functioning normally. If there is no water or the water is slow, it means that the water is blocked or the machine is abnormal.
2. After inserting the bucket into the smart seat, the water in the bucket automatically flows into the hot and cold tanks. Due to the pressure difference in the bucket, there should be bubbles in the bucket rising and intermittent noises; press the faucet and press the hand, and the bubbles and sounds will follow. Elimination, indicating that the water ingress is normal. Check whether the rubber plugs of the drain pipes of the cold and hot tanks are firm, and whether there is a snap ring that secures the rubber plugs.
https://www.sprayerfactory.net/product/electric-drinking-water-pump/
1. Check the top cover of the water dispenser. If there is no smart seat, it means that the water inlet system does not have the ability to prevent secondary pollution. This type of water dispenser is not suitable for purchase. The smart seat should be installed firmly and the disassembly should be smooth. The thread connection of the guide post and the smart seat must be firm; if it is loose, it cannot be tightened, indicating that the thread of the guide post and the smart seat is not well integrated, and the root of the guide post is easy to fall out or break when used in the future. After bottled water is injected into the water tank (generally 2-3 times), do not press the faucet, the faucet should not drip (the faucet is sealed normally); observe the water level of the bucket, if the water level drops sharply, it means that there is water leakage in the machine (the rubber nozzle head comes out) If there is water leakage), it is not suitable to buy; press the faucet and press your hand (1.5-2 seconds for cooling and 2-2.5 seconds for heating), the faucet should have water flowing out and the water is smooth, indicating that the drinking fountain is functioning normally. If there is no water or the water is slow, it means that the water is blocked or the machine is abnormal.
2. After inserting the bucket into the smart seat, the water in the bucket automatically flows into the hot and cold tanks. Due to the pressure difference in the bucket, there should be bubbles in the bucket rising and intermittent noises; press the faucet and press the hand, and the bubbles and sounds will follow. Elimination, indicating that the water ingress is normal. Check whether the rubber plugs of the drain pipes of the cold and hot tanks are firm, and whether there is a snap ring that secures the rubber plugs.
https://www.sprayerfactory.net/product/electric-drinking-water-pump/
コメント